Metal Brite or Rust Stripper PDF Print E-mail
Written by PT. Chemical Mandiri Jaya   
Saturday, 03 October 2009 23:48

BUSOL RUST STRIPPER/METAL BRITE
Acid Cleaning Agent for the Cleaning of Alumunium, Copper and other Metals



INTRODUCTION
BUSOL RUST STRIPPER is an acid cleaning agent based on phosporic acid and non ionic surface active agents. It is suitable

for the cleaning and brightening alumunium. It removes cooper oxides, rust stains on painted surfaces and it bleaches wood.

BUSOL RUST STRIPPER is safe to use on most common metals and painted surfaces.


AREAS OF APPLICATION

-    Immersions Baths

BUSOL RUST STRIPPER is generally applied undiluted in immersion baths for the cleaning of alumunium components

-    Spraying

BUSOL RUST STRIPPER is sprayed undiluted on the components to be cleaned.

-    Tanks

BUSOL RUST STRIPPER is applied in tank cleaning after the water rinse for the removal of white lime deposits on the tank walls

-    General Maintenance

BUSOL RUST STRIPPER is used for the cleaning of ships wooden decks and for the removal of rust stains on painted surfaces.


DIRECTION FOR USE

-    Cleaning in Immersion Baths Made of Plastic or Stainless Steel

BUSOL RUST STRIPPER is applied undiluted for the cleaning of alumunium components. Introduce the components to be cleaned into the bath and let them soak for 5-10 minutes. Remove the components from the bath, brush them off and finally rinse with a powerful water jet.

-    Spraying Method

Preferably use plastic or stainless steel spraying equipment. Dampen the surface to be cleaned with undiluted BUSOL RUST STRIPPER and let it act for 10-20 minutes, finally rinse thoroughly with a powerful water jet.

-    Cleaning of Tanks

Inject 0,5 liter BUSOL RUST STRIPPER per 100 liter wash water directly into the tank washing system for approximatelyt 20 minutes. The recommended temperature is 75oC – 85oC. Finally wash the tanks thorougly with cold fresh water.

-    General Maintenance

For the cleaning of wooden decks and for the removal of cooper oxides, BUSOL RUST STRIPPER is used undiluted. To remove rust stains on painted surfaces, BUSOL RUST STRIPPER should be diluted with water (1 liter BUSOL RUST STRIPPER to 4-9 liter water of 60oC – 80oC). Let the product act for 10-20 minutes, then brush it of, if necessary, and rinse thoroughly with a powerful water jet.

 

PROPERTIES

  • Colorless liquid, contains phosphoric acid.
  • Non-flamable and completely miacible with water.
  • Safe to use on most common metals and painted surfaces.
Specific gravity (at 20oC)
Flashpoint c.c.
pH (1% solutions)
IMCO class
UN nr.
IMDG code
Table nr.
: 1.21
: none
: 2.0
: 8
: 1805
: 8115-2
: T710
rust-001rust-002rust-003

 

Last Updated on Saturday, 17 October 2009 09:49