Filterclean PDF Print E-mail
Written by PT. Chemical Mandiri Jaya   
Saturday, 03 October 2009 23:13

BUSOL FILTERCLEAN
Liquid Cleaning Agent for Removing Partially Carbonized Oils.



INTRODUCTION
BUSOL FILTERCLEAN is based on a mixture of aliphatic and chlorinated hydrocarbons, cresols and aionic surface-active agents. As a result, it is capable of removing partially carbonized oils. The product can safely be used on all common metals. Plastic and rubber, if present, should first be tested for chemical attack.

APPLICATION
BUSOL FILTERCLEAN is used chiefly for cleaning permanently fixed oil coolers, oil pre-heaters and metal/ceramic oil filters. These are regularly soiled by soil particles coming out of the oil and partially carbonized oils.
Timely cleaning with BUSOL FILTERCLEAN prevents the formation of coke-type components which are difficult or impossible to remove.

DIRECTIONS
BUSOL FILTERCLEAN is used undiluted only, at cleaning temperatures not exceeding 40oC. The cleaning effect is obtained by filling or circulating with BUSOL FILTERCLEAN. Cleaning will take 8 to 24 hours, depending on the degree of soiling.

PROPERTIES
BUSOL FILTERCLEAN is light-brown coloured fluid. It contains amongst other things, cresols and chlorinated aromatic hydrocarbons. It is not corrosive to the common metals. Plastics and rubber, if present, should be tested for chemical attack and the product may also attack paints and lacquers.

Specific gravity at 20oC
Flammable, flash point c.c.
pH 1% solution
IMCO code
: 1.04
: 45oC
: 8.7
: 6.1-1591 T 240-6.1-2076 T 720

 

Last Updated on Saturday, 17 October 2009 06:48