Air Cooler Cleaner PDF Print E-mail
Written by PT. Chemical Mandiri Jaya   
Saturday, 03 October 2009 22:59

BUSOL ACC
Air Cooler Cleaner



INTRODUCTION
BUSOL ACC containing emulsifying agent aromatic hydrocarbon corrosion inhibitor and surface-active agent

APPLICATION
Remove oil, grease, soot, and atmospheric dirt from air coolers and turbo blowers

DIRECTION FOR USERS
BUSOL ACC is mixed thoroughly with fresh water 1 volume BUSOL ACC with 2 volume of fresh water.

Immersing
Where possible the cooler should be dismantled and immerse in a suitable tank at temperature 50oC where possible. Afterward rinse the cooler carefully in water and blow dry with air.

Circulating
If the cooler cannot be dismantled, it can be cleaned by circulation process. Circulate for between 4 to 6 hours, heating up to maximum of 50oC where possible. Drain system and flush thoroughly with water.

Injection
During operation, air cooler and turbines can be cleaned with special tank and injector. Injector point is between the turbo blower and the air cooler at the suction side of turbo blower in the blower-housing outlet.

PROPERTIES

  • Light yellow colored neutral fluids, emulsifying with water suitable for use all metals
  • Keep out reach for childreen.
  • Harmful by inhalation, in contact with skin and swallowed



Last Updated on Saturday, 17 October 2009 06:48