CR-85 PDF Print E-mail
Written by PT. Chemical Mandiri Jaya   
Saturday, 03 October 2009 22:50

BUSOL CR-85
CARBON REMOVER



INTRODUCTION
BUSOL CR-85 is a two layer product. The top layer is a floating seal, which prevent escape of solvent vapours, minimizes drogout losses. The remaining is a compound of highly effective solvents, surface active agents and special agents to remove carbon.

APPLICATION
BUSOL CR-85 is used undilated for cleaning motorblocks gear boxes, pistons, oil pumps, oil filters, sprayers, pipes burners, pipelines, coolers, cleaning of carburettes, fuel pumps, diesel injection systems, rocker arm assemblies, all diesel engine parts, crankshafts, injector system components and all other parts where carbonised oil, gum and fuel residues must be removed.

DIRECTIONS FOR USE
Simply immerse the parts to be cleaned into a suitable container filled with BUSOL CR-85. Depending on the nature of contamination. Cleaning time will be between 2 and 10 hour. Following soaking, the parts should be pressure spray rinsed with water.

PROPERTIES AND SAFETY REGULATIONS

  • Contains Methylene Chloride and cresols. BUSOL CR-85 in containers has no flashpoint. When it is used in immersion baths however it becomes a flashpoint of about 80o C.
  • Non-corrosive to metals.
  • BUSOL CR-85 can be corrosive to plastics and rubber parts. So test first for corrosion.
  • Avoid contact with skin, eyes and clothing.
  • Take off immediately all contamined clothing.
  • Serious risk of boisining by inhalation, swallowing or skin contact.
  • Keep away from foodstuffs and beverages.
  • Keep container properly closed and in a cool well –ventilated place.

 

Last Updated on Saturday, 17 October 2009 06:48